Leave Your Message
about-us-banner
Products
01
Products Categories

TR-25 Buchholz Relay

A Buchholz relay is a safety device mounted on oil- filled power transformers, which can monitor the accumulation of explosive gases caused by dielectric failures such as leaking currents, arcs, flashovers etc. When a serious internal fault occurs in the transformer (such as turn-to-turn fault, TT F), the oil flow surge generated at this time is used to trigger the contact connection and quickly lock the main circuit of the transformer, thus protecting the transformer.

    shop_iconsAdd ShopCart
    Contact us Download

    1

    Excellent UV shielding using anti-UV laminated glass with over 99% UV protection. This ensures even if the observation window cover is left open for prolonged period, the transformer oil will not be affected.
    Laminated glass panel also ensures safety and protection.
    Probe equipped for partial trigger function for testing and calibration. When half-pressed the probe will trigger warning signal, while fully-pressed the probe will trigger warning and locking signal.
    High- strength full- metal movement structure ensuring stability at flow rate as high as 3.8 m/s.
    Main shaft of the bearing supported by imported precision bearing, eliminating wear and tear in float shaft.
    The oil flow baffle can automatically reset by gravity, eliminating the potential loss of the spring elasticity. IP67 protection class, no dew condensation inside.
    High performance magnets maintaining magnetism even at 200℃ .

    Main Components Material

    Casing

    Aluminum Alloy

     

    Window Panel

    Anti-UV Laminated Glass

     

    Working Conditions

    Oil Temperature

    -40℃~ +100℃

     

    Ambient Temperature

    -40℃~ +70℃

     

     

    Trigger Characteristics

    Flow Rate Locking Signal Setting Range

    0.7-3.8 m/s, precision ±10%

     

    Two Pairs of Magnetic Switch Contact Reads for Each Signal

    Slight Fault – Floater - Warning

     

    Severe Fault - Flap- Locking

     

    Installation Environment

    If installed outdoor, need protective casing

    Adopted for High Altitude Environments

    Cable Connection

    M20x1.5, One at each side of the connector box

    Electrical Characteristics

    220V AC 3A: Power Factor < 0.6

    220V DC 3A: Time Coefficient τ ≤ 0.005 s

    Withstanding Voltage

    Between Reed Contacts, and Contacts to Earth: 2.5kV DC/AC 1min

    Normally Open Reed Contacts: 2.0kV DC/AC 1min

    Number of Contacts

    Maximum 4 pairs

    Protection Class

    IP67

    Make an free consultant

    Your Name*

    Phone Number

    Country

    Remarks*

    reset