SF6 Gas Density Monitor
SF6 gas density transmitter
SF6 gas valve
SF6 Gas Detection Analyzer Series
Leakage Current Monitoring Series
Transformer Accessories Series
+86-400-820-1296
Products
01
China HM100PR Density Monitors for SF6 Gas - Reliable Factory Supply by Leading Suppliers
Add ShopCartTechnical Parameters for Remote Module
Power supply |
24V DC |
Anti-electromagnetic interference |
IEC61000-4-2 IEC61000-4-3 IEC61000-4-4 IEC61000-4-5 IEC61000-4-6 IEC61000-4-8 IEC61000-4-9 IEC61000-4-10 IEC61000-4-12 IEC61000-4-17 IEC61000-4-29 |
level 4/A level 4/A level 4/A level 4/A level 3/A level 5/A level 5/A level 5/A level 4/A level 3/A 0.1s/A |
(8KV/15kV) (30V/m) (4KV) (+/-2Kv) (10V) (100A/m) (1000A/m) (100A/m) (4KV) (10%UN) (40%UT/70%UT) |
Power consumption |
< 2W |
||||
Communication mode |
RS485 |
||||
Protocol |
ModBus RTU |
||||
Baud rate |
9600bps |
Technical Parameters
Technical Parameters |
|
Case diameter |
100mm |
Scale range |
-0.1 ～ 0.9MPa (customizable) |
Accuracy |
±1.0%FS（+20±1℃) ±1.8%FS（-20℃~ +60℃）（gas phase） |
Degree of protection |
IP65 |
Ambient conditions |
-20° C ～ +60° C, relative humidity ≤ 95%RH |
Leakage rate |
≤ 1×10⁻⁹ Pa·m³/s (Helium leakage inspection) |
Process Connection |
M20 × 1.5, (customizable) |
Installation method |
Radial or Axial |
Electrical connection |
Plug-in connection M20 × 1.5 sealing head Cable size: 1.5mm² recommended, upper limit 2.5mm² |
Contact insulation performance |
Insulation resistance: >100MΩ (DC 500V) Withstand voltage: 2kV, 50/60Hz, 1min |
Contact type |
Magnetic snap-action switch 80%Ag, 20%Ni, 10µm Gold plated |
Impact rating |
50g (oil-filled), 30g (non-oil-filled) |
Contact electrical parameters |
30W/50VA, 1A (upper limit) 220VDC/380V 50/60Hz (upper limit) |
Watch glass |
Laminated safety glass |
Weight |
≈ 1.2kg |
Pressure element |
Bourdon tube |
Frequently Asked Questions
Q
What is the power supply requirement for the remote module?
The remote module requires a 24V DC power supply with a power consumption of less than 2W, making it energy-efficient for continuous industrial operation.
Q
What communication protocol does the remote module support?
The remote module communicates via RS485 interface using the ModBus RTU protocol at a baud rate of 9600bps, ensuring reliable and standardized industrial communication.
Q
What is the accuracy of the pressure gauge and what are its operating temperature limits?
The pressure gauge offers an accuracy of ±1.0%FS at +20±1℃. Under extended temperature conditions (-20℃ to +60℃, gas phase), the accuracy is ±1.8%FS. The ambient operating range is -20°C to +60°C with relative humidity ≤ 95%RH.
Q
What electromagnetic interference standards does the remote module comply with?
The remote module complies with multiple IEC61000-4 series EMC standards, including IEC61000-4-2 through IEC61000-4-29, covering electrostatic discharge, radiated immunity, electrical fast transient, surge, conducted immunity, and more — all tested at Level 3 to Level 5 / Class A performance.
Q
What are the installation options and process connection specifications?
The gauge supports both Radial and Axial installation methods. The process connection uses a standard M20 × 1.5 thread, which is customizable upon request. Electrical connection is via a plug-in M20 × 1.5 sealing head with a recommended cable size of 1.5mm² (upper limit 2.5mm²).
Q
What type of contact and pressure sensing element are used in the gauge?
The gauge uses a magnetic snap-action switch contact made of 80%Ag / 20%Ni with 10µm gold plating for superior conductivity and durability. The pressure sensing element is a Bourdon tube. Contact electrical parameters are rated at 30W/50VA, 1A maximum, supporting up to 220VDC / 380V AC at 50/60Hz.